Pickering and Ajax have both kinds of homes side by side: brand-new houses and townhomes in Seaton and other growing neighbourhoods, and established homes in older parts of Pickering and around Pickering Village in Ajax. Owners of new homes often assume radon is an old-house issue, and owners of older homes sometimes assume the opposite. Neither assumption holds. Radon is a natural radioactive gas that comes from the ground, it has no smell or colour, and the only way to know the level in your home is to test. At Golden Home Inspections we test for radon as part of our home hazard testing in Pickering and Ajax, using long-term detectors analysed by an accredited lab. Call 647-704-7100 to book.

Yama Nehan is a Certified and Registered Home Inspector with about 15 years of home inspection experience and a construction engineering degree from George Brown (Building Renovations). He is also a licensed contractor with about 20 years of construction experience and the owner of Nehan Construction. That practical construction experience is one of the main reasons clients pick him: he knows how foundations, basement slabs and sump pits are built in new subdivisions and in older homes, and where soil gas can find its way in. Yama Nehan is the only one trusted to do the inspections himself, and Golden Home Inspections reports on the home’s condition; it does not use the inspection to sell repairs.

Key takeaways

  • Radon is found in homes across Canada. A new Seaton build and an older Pickering or Ajax home can both have elevated levels, so every home should be tested.
  • Health Canada’s guideline for radon in indoor air is 200 Bq/m³.
  • Health Canada recommends a long-term test of at least three months, ideally during the fall and winter heating season, which makes now a good time to start one.
  • Place the detector in the lowest level where someone spends at least four hours a day.
  • New and older homes differ in where radon tends to enter and when to test, not in whether to test.

Does a new Seaton home need a radon test?

Yes. Radon depends on the soil under the house and how air moves between the ground and the home, not on the year the house was built. Health Canada recommends testing all homes, including new ones. A newer home is usually more airtight, which saves energy but can also mean less natural air exchange. Some new homes include features such as a sealed sump lid or a capped pipe through the basement slab, but those features don’t measure anything. Only a test tells you the level. For a new build, start a long-term test once the home is occupied and the heating system is running normally, ideally in your first fall or winter.

Does an older Pickering or Ajax home need a radon test?

Yes, for the same reason. Older homes often have more openings where soil gas can enter: settlement cracks in the floor, open floor drains, unsealed sump pits, gaps around old service pipes and, in some homes, areas of exposed soil in a crawl space or cold room. Renovations also change how air moves through a house. Finishing a basement, replacing windows or adding a basement suite can change radon levels, so Health Canada suggests retesting after major renovations. If you are buying an established home in Pickering or Ajax, our guide to asbestos testing in older Pickering homes covers other hazard checks worth planning before renovation work.

How does radon testing compare in new builds vs older homes?

Question New build (for example, Seaton) Older Pickering or Ajax home
Should it be tested? Yes. Health Canada recommends testing all homes Yes. Health Canada recommends testing all homes
Common entry points to look at Sump pit, slab penetrations, floor-wall joint, service pipes Slab cracks, floor drains, unsealed sump pits, old pipe openings, crawl spaces or cold rooms
Best time to start After move-in, once the home is lived in and heated normally Any fall or winter, and again after major renovations
Where the detector goes Lowest level where someone spends at least four hours a day Lowest level where someone spends at least four hours a day
Recommended test length At least three months At least three months
What changes the result over time Finishing the basement, adding a suite, changes to ventilation Renovations, window and door upgrades, new basement finishes

How does a long-term radon test work, step by step?

  1. Talk through the home. We ask how many levels are lived in, whether the basement is finished or has a suite, and where people sleep.
  2. Choose the placement. Yama picks a spot in the lowest lived-in level, in a bedroom or living area, away from sump pits, drains, windows, exterior doors and heat sources.
  3. Run the test for at least three months. The household lives normally while the detector stays in place, ideally through the fall and winter.
  4. Lab analysis. At the end of the test period, the detector goes to an accredited lab for analysis.
  5. Plain-language results. We explain the result and compare it with Health Canada’s 200 Bq/m³ guideline.

What should you do if the result is above 200 Bq/m³?

Health Canada advises reducing radon when a long-term test shows a level above 200 Bq/m³. It recommends acting within two years for results between 200 and 600 Bq/m³, and within one year for results above 600 Bq/m³. Reduction is usually done by a radon mitigation professional, often with a sub-slab depressurization system that draws soil gas from under the basement floor and vents it outside. Sealing cracks and openings can help but usually isn’t enough on its own. After any reduction work, retest to confirm the level has come down. A high result is a solvable building issue, and a real number lets you plan calmly.

Checklist: getting ready for a radon test in Pickering or Ajax

  • Decide which level is the lowest one where someone spends at least four hours a day
  • Choose a bedroom, family room or living room on that level, not a kitchen, bathroom, laundry or storage room
  • For a new build, wait until the home is occupied and heated normally
  • Plan for at least three months of testing, ideally in the fall or winter
  • Keep the detector away from sump pits, floor drains, windows, exterior doors and heat sources
  • Tell everyone in the home, including any tenant, not to move the detector
  • Record the start and end dates for the lab
  • Plan a retest after finishing a basement or other major renovation

A situation we often see

A family buys a new home in Seaton and a few years later finishes the basement as a playroom and guest bedroom. Because the house is new, radon never came up. When we talk it through, the basement bedroom is now the lowest lived-in space, so that is where a long-term test belongs. The test runs through the winter, the lab result is compared with the Health Canada guideline, and the family knows where they stand instead of assuming a new house means a low level.

What affects the cost of radon testing in Pickering and Ajax?

Cost mainly depends on how many detectors the home needs (for example, one for the main living areas and one for a separate basement suite), whether you book the test on its own or alongside a home inspection, and whether you combine it with other hazard testing such as asbestos, vermiculite or mould and moisture checks. Our home hazard testing page for Toronto and the GTA explains how these services fit together. For inspections, see our Pickering home inspector page and our home inspector page for Pickering, Ajax, Whitby and Oshawa. The final price depends on the home, so call us for a quote.

Frequently asked questions

Is radon a concern in Pickering and Ajax?

Radon is found in homes across Canada, and levels can differ from house to house on the same street. The only way to know the level in your Pickering or Ajax home is to test it.

When is the best time to test for radon?

Health Canada recommends a long-term test of at least three months, ideally during the fall and winter, when windows are closed and the home is heated.

How soon can I test a newly built home?

Start once the home is lived in and the heating and ventilation are running normally. Testing an empty or unfinished house won’t reflect normal living conditions.

Do I need to retest after finishing my basement?

It’s a good idea. Health Canada suggests retesting after major renovations, because changes to the basement and ventilation can change radon levels.

Can I add radon testing to a home inspection?

Yes. You can book radon testing alongside a home inspection in Pickering or Ajax, and we can explain how to run the long-term test once you move in.

Buying or living in a new or established home in Pickering or Ajax? Call 647-704-7100 or email contact@goldenhomeinspections.ca to book radon testing with Golden Home Inspections, based in Toronto, Ontario. You can also read our guide to short-term vs long-term radon testing in Richmond Hill.